仿木栏杆油漆脱落的原因是什么呢

  许多顾客会关心仿木栏杆的剥落。当然,仿木栏杆在生产完成后,将经历从工厂生产到施工现场的运输过程。部分道路长而曲折,担心在运输和设备转移过程中损坏和掉漆。当然,编辑很有责任的告诉你,关于这个栏目的强度差,质量差,生产工艺也不奇怪,杆上会粉化,油漆碰了会掉下来!

 
仿木栏杆

 
 
  那么,仿木栏杆油漆脱落的原因是什么呢?如何保证仿木栏杆的高质量?其实,造成仿木栏杆油漆脱落的原因有两个:一是油漆本身;二是油漆本身的质量因素;油漆厂家的供应商有大厂小厂,油漆质量参差不齐,所以油漆供应商非常重要;天之岛的栏杆严格控制油漆质量。
 
 
  对试漆质量不合格的供应商坚决予以更换,严格规范外观控制!理由二:栏杆的强度,也是影响油漆脱落的原因之一,那么,如何控制栏杆的强度呢?当然,决定栏杆强度的是生产工艺;简言之,仿木栏杆采用钢筋混凝土原材料模具生产加工;模具分为玻璃钢模具和硅胶模具。
 
 
  硅胶模具的优点是在生产过程中;有一个非常重要的环节;就是“模具感觉过程”!通过耸人听闻的工艺来防止栏杆内部的空心和气泡;在这一点上,FRP模具是做不到的!天之岛严格控制仿木栏杆的生产工艺和原材料、外观和维修,并由质检人员严格把关。它有一个标准的生产流程,而且整个生产过程都是严格的,责任在每个人身上!
 
 
  仿木栏杆的油漆脱落是很影响大家的作用的!仿木栏杆的质量受到许多客户的重视!不过,在选择仿木栏杆厂家时,到工厂实地考察也是很有必要的!如果我们一味地选择便宜的仿木栏杆,当然,我们对它的质量不怎么评价;我们都知道货一分钱的道理!


 
仿木栏杆

 
 
  Many customers will care about the peeling off of the imitation wood railings.Of course,the imitation wood railings will go through a transportation process from the factory production to the construction site after the completion of the production.Some of the roads are long and tortuous,and worry about the damage and paint dropping in the process of transportation and device transfer.Of course,the editor is very responsible to inform you about the column about poor strength,poor quality and production process It's not strange that the rod will be powdered and the paint will fall off when it is bumped!
 
 
  So what's the reason for the paint off the imitation wood railings?How to ensure the high quality of imitation wood railings?In fact,there are two reasons for the paint falling off of imitation wood railings:one is the paint itself;the other is the quality factor of the paint itself;the suppliers of the paint manufacturers have large factories and small factories,and the quality of the paint is uneven,so the paint supplier is very important;Tianzhidao's railings strictly control the quality of paint.
 
 
  The supplier who shows poor quality in the paint trial will be replaced resolutely;the control of appearance is strictly standardized!Reason 2:the strength of the railings,the strength of the railings is also one of the reasons that affect the paint off,so,how to control the strength of the railings?Of course,it is the production process that determines the strength of the railing;in short,the imitation wood railing is produced and processed by reinforced concrete raw material mold;the mold is divided into glass fiber reinforced plastic mold and silica gel mold.
 
 
  The advantage of silica gel mold is in the production process;there is a very important link;is the"mold sensation process"!By the sensational process to prevent the hollow and bubble inside the railing;in this point,FRP mold is not able to do!Tianzhidao strictly controls the production process and raw materials,appearance and maintenance of imitation wood railings,and strictly checks by quality inspection personnel.It has a standard production process,and the whole production process is strict,and the responsibility is to everyone!
 
 
  Imitation wood railings paint off is very affect the role of all!The quality of imitation wood railing is valued by many customers!However,in the selection of imitation wood railing manufacturers,to the factory to field investigation is also very necessary!If we blindly choose cheap imitation wood railings,of course,we don't say much about its quality;we all know the truth of one cent for goods!

Copyright © 2014-2019 www.sdllddjg.com 山东千景园林景观工程有限公司 版权所有 

地址:菏泽市单县湖西路绿洲湾建材市场B11-4号 电话:18854049055 邮箱:780167665@qq.com

网络推广:济南网站优化